Api Brushless Lab Micromotor Set

384.00$

  • Do not Run the handpiece without bur.
  • When handpiece running, do not try to twist it.
  • When changing the bur, make sure the handpiece stop running completely.
  • After changing the bur, fasten the chuck completely before operating it again.
  • After working do not remove the bur from the handpiece.
Category:

Description

Api Brushless Lab Micromotor Set

Api Brushless Lab Micromotor Set has Good Quality Api Brushless Lab Micromotor with Handpiece Wire.

INDICATION :-

  • Widely used in precision grinding, carving and polishing for false teeth, precious stone, jewelry, nails mold handicrafts and so on.

ADVANTAGES :-

  • High-Quality Copper.
  • Brushless Handpiece Wire.
  • Best Quality Ball Bearing Set.
  • No Noise Low Vibrator.
  • With human engineering design.

Features :-

  • The intelligent control system Automatic protection against overcurrent, overheating, overloading.
  • Comfortable to operate Forward & backward rotating.
  • on & off switch, hand & foot control Special material and workmanship.
  • No Noise.
  • No vibration and running more smoothly Much bigger power.
  • Much stronger torque Precise speed control system.
  • Precise speed adjustment Touch panel, more elegant.
  • User-friendly design With memory and fault warning function.

Key Specifications :-

TECHNICAL SPECIFICATION :-

Model Micro Motor Brushless 803 T 8.5
Speed 50000RPM
Torque 8.5 N.cm
Power 230
Voltage 201-500 V
Usage Clinical
Brand API

NOTE :-

  • Do not Run the handpiece without bur.
  • When handpiece running, do not try to twist it.
  • When changing the bur, make sure the handpiece stop running completely.
  • After changing the bur, fasten the chuck completely before operating it again.
  • After working do not remove the bur from the handpiece.
  • Always chose proper rotating speed as per the above acceptable speed chart.
  • Do not always operate the unit at the highest speed.
  • Do not overload the unit.
  • Before switching off the power, stop the handpiece first.
  • Disassembly of the unit is strictly prohibited to avoid serious outcomes.

Packaging :-

  • 1 x Micromotor with Cord
  • 1 x Control Box
  • 1 x Foot Pedal
  • 1 x Stand

Direction to Use :-

STEP 1:-

  • Connect the handpiece to handpiece port. Connect the foot pedal to foot pedal port if in need.

STEP 2:-

  • Plug in and switch on the power of control box power switch .

STEP 3:-

  • For hand mode operation,press start/pause start.

STEP 4:-

  • For foot mode operation,press foot control and press the foot pedal to run the handpiece.

STEP 5:-

  • Set the speed control knob to desired speed.

STEP 6:-

  • Select the rotation direction by pressing FWD/REW switch.

Related products